Alarms Control Panel


 

Intruder / Burglar Alarms are electronic alarms designed to alert the user to a specific danger. Sensors are connected to a control unit via low-voltage wiring or a narrowband signal which is used to interact with a response device. The most common security sensors are used to indicate the opening of a door or window or detect motion via passive infrared (PIR). New construction systems are predominately hardwired for economy.


Retrofit installations often use wireless systems for a faster, more economical installation. Systems range from small, self contained noisemakers, to complicated, multi zoned systems with color -coded computer monitor outputs. Many of these concepts also apply to portable alarms for protecting cars, trucks, or other vehicles and their contents.


We have a vast variety of Alarm Control Panel, Intruder Detector, Sirens, Keypads, Motion Sensors, Magnetic Door Sensors, Active Infrared Beam Sensors (used in perimeter), Slim Line Barrier Curtain Sensors, almost all of the mentioned devices are available in both wired & wireless versions. Then we have intrusion related communication devices like Phone Dialer, LAN Communicators, Pagers, GSM Dialers & Loud Intercom.

 


Alarm Control Panel (Wired & Wireless)

Alarm Control Panel

this is a fully programmable control panel with building block architecture. By programming, it can be split into two separately operated sections (with a shared section).



It has a built in power supply and there is ample space for a back up battery (12V, 1.3Ah or 2.6Ah) in the control panel case.


Wireless alarm panel

Alarm Control Panel (Wired & Wireless) This is a fully programmable control panel with building block architecture. This allows the JA-65 to be tailored to particular installation requirements. The Maestro can operate as a wireless, wire operated or combined system.


It can work with 16 wireless detectors and can have 8 or 16 hard wire zone inputs.